Home / Guides / Bathroom wall panels instead of tiles

Bathroom wall panels instead of tiles

How waterproof quartz-core wall panels replace tiles and grout in bathrooms and showers, what they go over, and what to check before you specify them.

Bathroom with a bath and shower lined in stone-look waterproof wall panels

Why panels instead of tiles

A tiled bathroom wall is many small pieces held together by adhesive and grout. Every grout line is a place for mould, staining and cracking, and every tile has to be set, levelled, grouted and sealed by hand.

The Elementa replaces that with large 1200 mm wide sheets. A high-pressure laminate face sits on a quartz board that is fully waterproof, so the wall has only a few fine joints and nothing to regrout.

Fitting over existing tiles

Sheets are fixed with structural silicone, so they can go straight over sound existing tiles. That usually means no demolition, no skip bin and no waiting for adhesive or grout to cure, which shortens a bathroom refurbishment and keeps the room out of use for less time.

The existing wall must be firm and reasonably flat. Loose or drummy tiles are removed first.

Looks and sizes

Sheets are 1200 × 2400 mm or 1200 × 3000 mm, 7 mm thick. Finishes include stone and timber looks, solid colours, Elementa Mosaic with tile joints machined into one sheet, and the matt Ultra White Wall. Elementa Lite, a lighter 4 mm sheet, goes on ceilings.

Before you specify

Wet-area waterproofing in Australia is governed by the National Construction Code and AS 3740. Panels finish the wall; the membrane and junction details still need to suit the project. Talk to us and your building certifier about the detail for each wet area.

See the Elementa