Home / Guides / What a Group 1 fire rating means for wall linings

What a Group 1 fire rating means for wall linings

AS 5637.1 groups explained for architects and builders, and how Bodaq Wall was tested to reach Group 1, the highest group for wall and ceiling linings.

Hotel lobby lined floor to ceiling with grey stone-look mineral panels

Groups 1 to 4

In Australia, the fire hazard properties of wall and ceiling linings are classified into groups under AS 5637.1. Group 1 materials make the smallest contribution to a fire; Group 4 the largest.

The National Construction Code sets the minimum group allowed for linings depending on the building class, whether a sprinkler system is installed and where the lining goes, with the strictest limits in places such as fire-isolated exits and corridors in public buildings.

How a lining is tested

AS 5637.1 determines the group from a fire test of the lining. The cone calorimeter test to AS/NZS 3837 measures how quickly a sample releases heat and how long it takes to ignite, and the result gives the group number.

The Bodaq Wall result

The Bodaq Wall is a decor film on a 6 mm magnesium (mineral) board. It was tested to AS/NZS 3837 by Ignis Labs in Australia, in its lightest and darkest colours, and classified Group 1 under AS 5637.1. Certificate IGNL-7251-14C is valid until January 2029.

Group 1 gives the widest choice of where the panel can be used, from homes and offices to hotels, schools and healthcare. We can send the certificate for your documents.

See the Bodaq Wall