Home / Wall & Ceiling / Bodaq Wall

Bodaq Wall

A decor film on a 6 mm magnesium (mineral) board, made for walls in dry indoor rooms. It has the widest choice of looks, with more than 460 designs in stone, marble, timber, solid colours, metal, fabric and leather, and it is tested in Australia to AS 5637.1 Group 1.

Use on: Walls

Guide: What Group 1 means for wall linings

Kitchen and dining room with a full-height marble-look mineral panel wall

Overview

A 6 mm magnesium (mineral) board wrapped in a decor film, for walls in dry indoor rooms. For bathrooms and showers, choose the waterproof panel instead. The film runs around both long edges, so panels butt together with a fine line and no grout or trims.

There are more than 460 designs across stone and marble, timber, solid colours, metal, fabric and leather. Panels go up dry with stone-grade silicone, so a feature wall can be finished in a day.

Best forFeature walls, living rooms and bedrooms, offices, retail and hospitality (dry areas only)

Specification

Thickness6 mm
Sheet sizes900 × 2420 mm, 570 × 2420 mm (2700 and 3000 mm made to order)
CoreMagnesium board
SurfacePET decor film, edges wrapped
WaterIndoor dry areas only; not for bathrooms or showers
CeilingsNo, walls only
FireAS 5637.1 Group 1
Weight6.94 kg/m² (15.1 kg per 900 × 2420 mm sheet)
DesignsMore than 460
FixingStone-grade silicone, dry fix; optional mouldings
Sound absorptionNot rated
Made inKorea

Inside the panel

1234
  1. 1Protective film Peeled off after installation.
  2. 2Decor film Durable, stain-resistant surface in 460+ designs.
  3. 3Mineral core 6 mm magnesium board, semi-noncombustible (Korean standard).
  4. 4Wrapped edge Film folded around both long edges for a clean joint.

Featured patterns

Twelve favourites, each with room photos and sizes.

Full catalogue

All 464 designs in the current range. Select a swatch for a closer look and to order a sample.

Colours on screen are a guide. Order a sample to see the real finish.

Installed

Two ways to joint

No moulding
The film is wrapped around both long edges, so panels butt together with a fine, clean line and no grouting.
Hidden moulding
Edges are grooved and joined on a concealed T-profile for a straight, flush joint on long runs.

Aluminium mouldings

Joining, hidden
22 × 5.5 × 2,400 mm
Joining, exposed
15 × 9.5 × 2,400 mm
Edge trim
10 × 9.4 × 2,400 mm
Inside corner
15 × 17 × 2,400 mm
Outside corner, angle
15 × 15 × 2,400 mm
Outside corner
22 × 13 × 2,400 mm
Colours
White, beige, ivory, gold, silver and bronze

How it goes up

1. Apply silicone
Run stone-grade silicone (KS F 4910 F-25HM) around the back of the panel first, then in dabs across the middle.
2. Fix the panel
Set the panel level and press it onto the wall.
3. Press and tidy
Press firmly over the whole face, then clean up the joint line.

Installer tips

Protective film
Peel it back at the corners only while fixing; remove the rest when the job is finished.
Silicone
Allow about one tube per panel. Fix mouldings with clear silicone.
Joints
Tape across joints with clear tape until the silicone sets, so panels do not slip.
Cutting
Use a fine-tooth circular saw for timber, film side down, and a hole saw or jigsaw for openings. Do not nail through the panel.
Wall preparation
Clear nails, stickers and wallpaper from the wall before you start.
Handling
Protect corners in transit, stack face to face, keep heavy loads off the stack, and store flat and out of direct sun.

Certification

  • AS 5637.1 Group 1. Tested to AS/NZS 3837 by Ignis Labs, Australia, in the lightest and darkest colours. Certificate IGNL-7251-14C, valid to January 2029.
  • Korean carbon footprint label, Korea Eco-Label and SGS
Certification marks: Korean carbon footprint, Korea Eco-Label and SGS

Product photos courtesy of our manufacturing partners.